Capabilities
Each capability below is backed by audited factories whose machine lists, tolerances, and quality history we have verified in person, not by a directory search.
Group 01
3-, 4-, and 5-axis vertical and horizontal machining centers for prismatic parts, housings, and complex contours.
2-axis to multi-axis turn mill centers with live tooling for shafts, bushings, and turned and milled components in one setup.
Sliding headstock lathes for small diameter, high precision turned parts at volume, with excellent length to diameter capability.
Surface, cylindrical, and centerless grinding for hardened components requiring fine finishes and tight geometric control.
Die sink EDM for hardened materials, deep cavities, sharp internal corners, and features conventional cutting cannot reach.
Wire cut EDM for burr free profiles in hardened material, including punches, dies, and precision apertures with taper capability.
Group 02
Fiber laser cutting of sheet and plate with clean edges, small kerf, and nesting efficiency that lowers material cost.
Abrasive waterjet for thick sections and heat sensitive materials, with no heat affected zone and no edge hardening.
CNC press brakes, turret punching, and hardware insertion (PEM) for formed sheet components and enclosures.
MIG, TIG, and spot welding by coded welders, with WPS/PQR documentation and NDT for critical joints.
Plate rolling, structural fabrication, and machining of large weldments, stress relieved and machined after welding for stability.
Group 03
Open and closed die forging with normalizing, quench and temper, and full mechanical testing traceable to heat number.
Green sand and no bake casting for structural and pressure tight components, supplied as cast or fully machined.
High pressure and gravity die casting for high volume aluminum and zinc components with excellent surface finish.
Lost wax casting for complex near net geometries that minimize machining, in stainless and alloy steels.
Group 04
Tool design, mold build, and serial molding of engineering polymers, including insert and overmolding.
FDM, SLA, SLS, and metal DMLS for prototypes, fixtures, and low volume production parts, quoted alongside conventional processes.
Group 05
Hardening, tempering, case carburizing, nitriding, and stress relief with furnace charts and hardness certification.
Epoxy, polyester, and hybrid powder systems over phosphated or blasted surfaces, with DFT and adhesion testing.
Type II decorative and Type III hard anodizing with masking, dyeing, and sealed finishes per MIL-A-8625.
Electroless nickel, in mid and high phosphorus grades, for uniform, corrosion resistant coatings on complex geometries.
Hard chrome for wear and low friction surfaces, ground and polished to final size after plating.
The list above covers the network's core competence, but with 100+ factories, edge cases are often within reach. Send the drawing; we'll answer honestly within a day.